DIN 314 Wing nuts edged wings DIN 314 - 1999
Product Name: | Wing nuts edged wings DIN 314 - 1999 | |
Standard: | DIN 314 - 1999 | |
Material: | Carbon steel and stainless steel | |
Size: | Reference standards and according to customer requirements | |
Finished: | Zinc Plated,Hot Dip Galvanized Steel,Dacromet,Nickel Plated,Black Oxide,Plain | |
Delivery time: | Normally in 30-40 days. |
Thread Position | Internal | Thread Type: | Metric [M] |
Internal Driving: | / | External Driving: | Wing / Thumb |
Locking Type: | / | Shank: | / |
Point: | / | Mark: | As required |
①,Material: Steel (St) (forged or cold worked), or malleable cast iron (GT) (GTS or GTW), or copper-zinc alloy (CuZn) (malleable or casting alloy), or austenitic (A) (grade at manufacturer discretion) |
About Nuts, Materials, and Finishes
Types of Nuts
Hex Nuts are the most common nuts for general fastening applications.
Hex | Thin Hex | Extra-Wide Hex | Extra-Wide Thin Hex | High Hex |
Locknuts have a locking feature to resist loosening under vibration.
Flange nuts distribute holding pressure and reduce stress where the nut meets the material surface. Their wide base eliminates the need for a separate washer.
Cap nuts cover and protect threads while adding a finished appearance.
Square nuts have large sides, which makes them easier to grip with a wrench and keeps them from rotating in channels and square holes.
Thumb and wing nuts can be tightened or loosened by hand. They’re often used in applications that require frequent adjustments.
Quick-threading nuts slide smoothly onto threads for quick installation and easy adjustments.
Coupling nuts are used to connect or extend threaded rod. They’re about three-times taller than standard hex nuts.
Tamper-resistant nuts have hard-to-grip uncommon drive styles to reduce the risk of theft and tampering.
Press-fit nuts add threads to thin metal or plastic panels. Install using an arbor press or similar pressure tool.
Weld nuts add threads to metal surfaces.
Comparing Materials by Strength
Comparing Coatings and Finishes by Corrosion Resistance
Choosing a Compatible Nut Grade
Match your bolt, screw or threaded rod with a comparable strength nut.
Understanding Thread Size
Inch sizes are specified by the diameter of the opening and threads per inch. For those with a diameter smaller than 1/4", diameter is indicated by a number (e.g., #1 or No. 1).
Metric sizes are specified by the diameter of the opening and pitch.
Q1.
|
Who are we?
|
A1:
|
We are based in Ningbo, China, starting in 2009, and sell to North America, Oceania, Domestic Market, Eastern Europe, Southeast
Asia, South America, Africa, and the Middle East. We have professional teams doing development, manufacturing, quality control and service management. |
Q2.
|
How can we guarantee quality?
|
A2:
|
Always take a pre-production sample before mass production. Always complete an inspection before shipment.
|
Q3.
|
What can you buy from us?
|
A3:
|
Fasteners: screws, bolts, nuts, washers, some CNC parts
Solar hardware: Solar Mounting Racks, Solar Mounting Accessories, Cable Clips, and ABS Solar Mounting Brackets. |
Q4:
|
Why should you buy from us, not from other suppliers?
|
A4:
|
Sokun is a professional manufacturer specializing in research, development, manufacture, and servicing of solar mounting systems.Since founding in 2009, we have professionally designed products to handle all systems as well as to ship goods in a timelymanner.
|
Q5.
|
What is your payment method?
|
A5:
|
30% value of T/T in advance and other 70% balance on B/L copy. For small order less than 1000USD, would suggest you pay 100% in advance to reduce the bank charges.
|